Shower Curtain Rod Straight - Ceiling Bracket Only - Stainless Steel

Free hanging shower curtain rod straight, with 2 ceiling brackets for mounting the shower curtain rod only on the ceiling, without connection to the wall.

The Shower Curtain Rod Straight - Ceiling Bracket Only - Stainless Steel is suitable for shower enclosures where the shower curtain rod cannot be connected to the wall or you don't want to in order to avoid drilling holes. This shower curtain rod hanging from the ceiling is also a good solution for shower niches with a glass wall that is too low. In order to keep the shower curtain on the shower curtain rod, end rosettes are attached to the end of the rod as stoppers. Together with the shower curtain fastening hook HKD12, a shower curtain can be pulled past the ceiling bracket without interruption. The number of shower curtain hooks required depends on the intended shower curtain width and is therefore not included.

Shower curtain rod straight - ceiling mount - dimensions

The standard length of the Shower Curtain Rod Straight - Ceiling Bracket Only - Stainless Steel is 160cm and comes with two ceiling brackets of 40cm length (adjustment possibility ± 10mm), which can be shortened on site. With the ceiling brackets that can be shortened on site, the shower curtain rod can be easily fixed at a height where a standard length shower curtain can be used. We recommend rather to adjust the shower curtain rod to the shower curtain once than to make expensive shower curtain custom-made to the shower curtain rod in the long run.

Shower curtain rod straight - ceiling installation - special dimensions

The standard length of the shower curtain rod straight - ceiling mount - stainless steel is usually suitable as a shower curtain rod for the bathtub. On request, we can manufacture your individual shower curtain rod made to measure. To do this, select "special size" in the options and specify the desired length in the ordering process. At this shower curtain rod only the length of the ceiling bracket can be shortened independently! If a longer ceiling bracket is needed, we will be happy to advise you.

An elegant solution is the shower curtain rod with ceiling bracket, for example, also in a floor-level walk-in shower niche made of glass, if the glass wall does not have the necessary height to clamp a shower curtain rod in the required height between, or mount. Since the shower curtain rod mounted exclusively on the ceiling does not require side mounting, the shower curtain rod with the correct ceiling bracket length can be hung exactly above a side wall that is too short.

Height of shower curtain rod for bathtub and walk in shower.

Make sure that the shower curtain does not hang too slanted and too deep into the bathtub. A pronounced slope in the bathtub can be deducted from the width of the shower curtain. In the case of shower curtain rods for bathtubs, it is sufficient if the shower curtain hangs 15-20cm into the bathtub, i.e. for a shower curtain with 180cm height/length, the distance between the top edge of the bathtub and the shower curtain rod should not exceed 165-168cm. Similarly, for shower curtains with 200cm height/length, the distance between the top of the bathtub and the shower curtain rod should be 185-188cm. For walk in showers that are level with the floor, the shower curtain rod should hang at 204cm above the floor.

Straight shower curtain rod options

Flexible wall brackets; flexible wall brackets are available for mounting the shower curtain rod under a pitched roof or dormer. Either these wall bearings are combined with the ceiling rose or the ceiling bracket is cut to exact length and provided with a thread, which is directly connected to the flexible wall bearing. We will be happy to assist you in determining the length of the ceiling bracket.

Mounting rosette; for mounting the ceiling brackets, an 8mm hole is required, into which a dowel and a 6mm hanger bolt are screwed. Depending on the condition of the ceiling, you may end up with an improperly drilled hole. With a mounting rosette flashes are elegantly concealed.

Surface polished; the shower curtain rod is polished by hand to a matte finish after manufacture, or highly polished upon request. For the shower curtain rod polished by hand, additional time must be expected. The prices for polishing are indicative. The exact cost and time required should be asked on a daily basis. The high-gloss polished stainless steel surface of the shower curtain rod geraade - only ceiling mounting- stainless steel is a custom-made and excluded from exchange.

Recommended shower curtain width for 160cm shower curtain rod length: 180cm.

Shower curtain rod straight - ceiling mount only - material: 100% stainless steel, diameter 12mm

Shower curtain rod straight - ceiling bracket only - made to measure: On request

Shower curtain rod straight - ceiling bracket only - Surface: stainless steel satin or high gloss polished

If you have any further questions, please do not hesitate to contact us.

100% Made in Germany.