Shower Curtain Rail L Shape DSE 90 - Ceiling Mount - Stainless Steel
Made to Measure | on request |
Material | V2A stainless steel |
Shower Hooks | HKD12, not included |
Surface | glossy polished, matt grinded |
Elegant stainless steel shower curtain rod in L shape, with ceiling mount. For barrier-free showers and shower trays that are curbless accessible at floor level. Optional adhesive wall mount (no drilling).
At 90x90 cm, the shower rod is usually perfect for standard shower corners and shower trays. When planning the shower, consider that the shower curtain needs to hang within the shower tray. If in doubt, it is better to measure again. This is particularly advisable for barrier-free walk in showers that are accessible at floor level. For level shower areas and very flat shower trays with an edge that is about 2–3 cm high (such as a tiled border to keep water in), the shower curtain rod must be set behind the edge so that the shower curtain drips off behind the edge, even with slight folds. If necessary, a floor mounted splash protection needs to be taken into account.
Shower curtain rail holder
Two different shower rod corners are available: A "comfort corner" with a 70mm radius, so that the shower curtain can be pulled comfortably around the corner, or a "sharp corner" with a 14mm radius, which partly fits better to the cutting edge design of a modern bathroom. With both versions, in combination with the shower curtain hook HKD12the shower curtain is guided freely around the ceiling holder and without being stopped. This HKD12 shower curtain hook is expensive, because it is made by hand, but it is absolutely necessary to take advantage of the clever shower curtain rod construction.
The correct shower curtain rod height allows the bottom edge of the shower curtain to hang approx. 1-2cm above the floor in an open ground-level shower. Our simplified calculation of the ceiling hangers length: Room height - shower curtain length - 4cm= length of ceiling holder measured up to the middle axle of the shower rod. If the shower curtain is to last for a long time, it must not stand in water under any circumstances. The supplied ceiling bracket has a length of 40cm and can easily be shortened to the required length with a hacksaw. In the ceiling bracket the height of the shower rod can be adjusted by +-1cm. The shower rod cannot be shortened without a CNC milling machine. We are happy to manufacture individual special dimensions of shower curtain rods directly in the workshop and deliver the entire package, including screws and plugs, ready for installation in the bathroom. If you are looking for a shower curtain rod to adjust yourself, you should take a look at the shower curtain rod L shape of the A100 bathroom accessory series, this shower curtain rod is also available in black.
Shower curtain rail surface
The shower curtain rail is top notch quality. Made of a solid 12 mm stainless steel rod, scratch-resistant, robust and easy to clean because it is antibacterial. The standard surface of the shower rod is sanded by hand after production to a shimmering matt finish. On request, chrome comparable high gloss polished. With the hand polished version, an additional time expenditure of approx. one week must be expected and represents a special production and is excluded from the Umtasuchausschlossen.
Installation of the shower curtain rail without drilling
With the adhesive adapter the shower curtain rail can be fixed without drilling. The adhesive adapter has proven itself over the years and simplifies the fixing of the shower curtain rail on tiles and smooth surfaces. The height of the adhesive adapter (6mm) must be added to the leg length of the shower rod. For fixing the shower rod on glass, e.g. in an open shower cubicle with a glass wall on one side, we recommend the glass adhesive plate with crystal-curing UV adhesive.
Shower curtain rail options
Cover rosettes To fix the shower curtain rail, 3 holes with 8mm must be drilled without adhesive adapter. Since the rod itself has a diameter of only 12mm, we recommend cover rosettes for a clean finish of shower rod and wall or shower curtain rods ceiling bracket and ceiling.
Delivery without shower curtain rings. The number depends on the selected shower curtain width.
Recommended shower curtain width: 200cm or 2x 120cm
Shower curtain rod diameter: 12 mm
Material: 100% solid stainless steel
Shower curtain rails dimension: 90x90 cm
Made in Germany
Our conclusion: first choice. A simply good and all-round recommendable shower curtain rail. Every single part is well thought-out and precisely handmade. The rod pleases by an impressive fitting accuracy and excellent surface quality. If you are looking for an easy-care, hygienic and yet uncomplicated holder for your shower curtain, we recommend this shower curtain rail.
Due to the packing dimensions, delivery to a packing station is not possible!
If you have any further questions, please do not hesitate to contact us.
Made to Measure: | on request |
---|---|
Material: | V2A stainless steel |
Shower Hooks: | HKD12, not included |
Surface: | glossy polished, matt grinded |
Login
27 May 2015 12:23
Sehr schön, schlank und ...
Sehr schön, schlank und stabil.
21 April 2022 10:34
Sitzt gut und sieht edel ...
Sitzt gut und sieht edel aus
18 August 2022 10:01
Elegante Stangen gut vera...
Elegante Stangen gut verarbeitet und gut zum Anbringen